Tubulação que obstrui a bolsa a ar inflável usada à tubulação

N ° de Modelo: vários Forma: Cilindro e de acordo com seus desenhos ou amostras Modelo: 300-2700mm Cor: Preto Uso: Pipeline Maintance e Testing Transporte Pacote: em Casos de Madeira Origem: Hengshui, Hebei, China Condição: Usado Material: Neoprene Temperatura: -40oc-230oc Mercados de Exportação: Global Marca comercial: Jianfeng Especificação: Como Pedidos Código HS: 4001100000 Abastecimento de água com dutos de oleodutos \ n \ n Insuflável balão de água e conhecido como saco entupido de tubulação, bloqueio de tubulação, balão de teste de água fechada bloqueio de água fechada, acoplamento de dutos de ar, oclusor de tubulação. A bolsa de água de encaixe é feita por uma borracha natural melhorada, cada balão de água de bloqueio antes da entrega será testado a 1,5 vezes a pressão de trabalho nominal e o número correspondente de tubo. A fim de garantir a resistência da estrutura da bolsa de água, adotamos três vezes a pressão de trabalho do fator de segurança. \ N \ n Os airbags de conexão Jianfeng são feitos de materiais compósitos de borracha e polímero de alta qualidade, A base do produto original, absorvendo as vantagens dos produtos estrangeiros, através da melhoria tecnológica da produção e inovação de produtos, no uso de desempenho, são mais elevados, anti-envelhecimento, vedação apertada e se adapta a uma ampla gama de diâmetros e vedação velocidade, fácil de operar do que os airbags de água fechados comuns elásticos. \ n \ n \ n \ n (1) classificação do air bag de bloqueio de água do Gasoduto \ n \ n i.Tomada de ar de água por função:

1, the pipeline plugging operation type: water blocking air bag is mainly used for pipeline maintenance and sealing construction.

2, the pipeline detection operation type: water blocking air bag is mainly used for pipeline closed water leakage detection construction.

\ n ii.Imprimir o air bag pelo uso de matérias-primas:

1, pure rubber type: water blocking air bag with natural rubber, rubber, rubber, butyl rubber, butyl rubber, made of pure rubber.

2, compound rubber: water blocking air bag using a variety of synthetic or natural rubber processing products.

3, skeleton material type: plugging water balloon with polyester, nylon, nylon, aramid fiber fabric is coated on the surface of rubber or other materials processing products.

\ n \ n iii.Água que obstrui o airbag de acordo com o processo de moldagem:

1, a curing molding process: the water blocking air bag on the curing tank or other curing equipment through a vulcanization molding products.

2, a number of curing molding process: a number of complex water plugging air bag after a cure is not finished, it uses a number of curing process.

3, the adhesion forming process: forming bonded together by a plurality of groups of film sheet with adhesive material connection.

4, heat vulcanization forming process: water plugging bag film by special equipment will be made of high temperature pressure of the adhesive.

\ u.Água que obstrui o airbag pela forma:

1, round;

2, cylindrical;

3, square;

4, oval;

5, egg shape;

6, hollow cylindrical.

\ n v.Água conectando o airbag usando pressão:

1, no pressure: water blocking air bag is suitable for general drainage, sewage and other non pressure pipe plugging.

2, low pressure: water blocking air bag is suitable for general drainage, sewage and other pipeline acceptance test.

3, medium pressure: water blocking air bag is suitable for the repair of water supply pipeline operation.

4, high pressure: water plugging bag is suitable for oil and other pressure pipeline maintenance.

\ n \ n \ n \ n \ n (2) Método de uso: \ n Colocar o plugue na necessidade de conectar a boca do tubo e o comprimento do tubo é colocado no comprimento do plugue.de seguida, através da válvula de admissão apressado para o ar comprimido para a pressão necessária pode ser construído. Após a conclusão da construção depois de abrir a válvula de entrada para liberar o ar, remova o plugue. \ N \ n (3) O modelo do airbag de selagem da tubulação é: cápsula de bocal de gás de PVC, plugue de água fechada do tipo composto, água fechada plugging, e duas cápsulas cheias de gás diferentes.

Two glue a cloth(mm)	Inflation pressure(Mpa)	Three glue two cloth specifications(mm)	Inflation pressure(Mpa)
Φ300×1000	0.045	Φ800×1200	0.06
Φ400×1000	0.040	Φ1200×1800	0.05
Φ500×1000	0.031	Φ1500×2000	0.05
Φ600×1000	0.028	Φ2000×2500	0.045
Φ700×1000	0.027	Φ2200×2800	0.03
Φ800×1200	0.026	Φ2500×3000	0.03

\ n (4) Função de detecção de obstrução de água fechada:

1, the high-rise construction pipeline leakage test: capsule is fed by examination of the mouth, inflation after the inspection, such as pipeline chlamydia or saliva is not strict, you can see the leak test.

2, check the toilet: Capsule on the drain after inflation, such as rubber banding is not strict, water will leak from the interface.

3. Check the floor drain: open the floor drain bowl, the capsule into the floor drain, inflatable splashing in the ground, such as the installation of floor drain not according to the provisions of the pallet filling ash plugging holes, water will be from around the floor drain leakage.

4, a variety of pipeline maintenance temporarily used to block water

\ n \ n \ n \ n (5) O teste deve ser usado para bloquear a água, as especificações da cápsula devem ser testadas com o tubo de suporte, várias especificações da cápsula deve ser usado na tubulação correspondente, O procedimento de teste é o seguinte:

preparation: first closed water blocking inflatable combination device accessories as tools to check the leakage. The capsules were placed on the bucket full of water in and hold, Pump to the inflatable capsule,Check the leak of the capsule.

open riser inspection hole, put closed water blocking from the mouth slowly upward into about 0.5m, and then inflate the capsules, the capsule and the inner wall of the tube are closely contacted with the water without leakage. The operator in the lower layer. Note, the capsule to avoid on the riser pipe joints. The reason: 1. The inner wall of the place has a joint, which affects the tightness of water tight. 2.Capsule to the side of the expansion, the pressure does not go up, if continue to inflate, the capsule will be broken. For the cast iron drainage pipe, clean with sand cleaning , flat wall, not allowed to have burrs, otherwise it will affect water plugging, even piercing the capsule.

in the floor of the mouth (can also be in check) to floor height and check pipes and fittings interface one by one,If there is a leak, make a mark, repair after drainage; If the flexible interface for the rubber ring, can be in the leakage of the interface with water tight bolt fix. If the pipeline inspection without leakage, it can stabilize the water level, duration 15 minutes, 5 minutes level does not drop as qualified.

(4)The pipeline plugging water balloon deflation, and then slowly out of the capsule, pay attention not to make the capsule damaged.

(5)After removing the pipe blocking water bag, water should be able to quickly walk away, such as slow down, there is a debris blockage in the pipe section, should be promptly cleaned.

(6)Pipeline plugging water balloon method, also can check squatting type toilet leaks. The capsules were placed on the squatting type toilet drainage mouth and inflated, then squat toilet (water level will on edge), if the water level drops that flushing water inlet interface leakage, or squatting type toilet water closed interface, lax, or squat stool is leakage. It is necessary to exclude.

\ n \ n \ n Informações de contato \ n Gerente de vendas: Mr.Steven \ n Celular: 86-15233296877 \ n Tel: 86-318-5106277 \ n Fax: 86-0318-5106277 \ n Site: www.prolianz.com \ n Empresa: Hengshui Jianfeng Engenharia Rubber Co., LTD.

Grupo de Produto : Plugue De Tubulação De Borracha Inflável